A rowhouse solar project is a structural and permitting question before it is an energy question.
Only about 45.4% of Baltimore metro housing units are single-family detached, according to ACS estimates, and about 55.7% were built before 1980. That makes the typical solar candidate a rowhouse with a flat or low-slope roof, a shared parapet, and a structural history nobody has documented in decades. The mounting design and the permit package carry more weight here than module choice.
Ask whether the array is ballasted or mechanically fastened, and why that method suits the roof. Ask whether a structural review is part of the permit package and who performs it. On an older flat roof, the weight distribution, the membrane condition, and the parapet details all matter.
Ask how the design keeps equipment away from the shared wall and how the work is coordinated with a neighbor. If the roof is shared, ask who has authority to approve the installation and what happens at resale or re-roofing. Get the answer in writing before signing.
Ask how shade was measured, including neighboring buildings and chimneys rather than only trees. Ask whether the property is in a historic district or subject to design review, and who prepares that submission. A project that ignores approvals can stall after equipment is ordered.
Ask how penetrations are flashed and sealed, where the inverter will be mounted, and whether a main panel upgrade is included. Ask how the system connects to the utility and who handles the interconnection application. Those details decide whether the project finishes on schedule.
- Is the array ballasted or fastened, and why? - Is a structural review part of the permit package? - How is the shared wall or shared roof handled? - Was shade measured for neighboring buildings, not just trees? - Is the property in a historic district, and who handles approval? - Is a panel upgrade included, and who files the interconnection?
This page does not estimate production, savings, or payback for a specific property, does not confirm which incentives apply, and does not certify structural or code compliance. Those depend on the roof, the equipment, local code, utility rules, and current tax law, which should be checked with the relevant official source.
The 2024 ACS 5-year estimates put the metro at about 2.8 million residents and 1.1 million households. About 66.9% of occupied homes are owner-occupied, and about 45.4% of housing units are single-family detached, so many installations happen on attached homes where the roof is shared with a neighbor. About 55.7% of housing units were built before 1980. This page reports Census indicators only; a NOAA station is not included for this metro in the site dataset.
| Indicator | Value | Source |
|---|---|---|
| Metro population | 2,849,436 | U.S. Census Bureau |
| Households | 1,120,269 | U.S. Census Bureau |
| Owner-occupied share | 66.9% | U.S. Census Bureau |
| Single-family detached share | 45.4% | U.S. Census Bureau |
| Housing units built before 1980 | 55.7% | U.S. Census Bureau |
Census values describe the metro area, not an individual property. A climate station is not reported for this metro in the site dataset.
Reviewed on 2026-11-18.