Charlotte's paint failures start with moisture and biology, not sun. Most of the work happens before the first coat.
Charlotte gets about 43.6 inches of rain a year with humid summers and a heavy spring pollen season. On siding and trim, that combination produces the familiar cycle: pollen and dirt hold moisture against the surface, mildew appears on the shaded side, and the coating fails at joints before it fails on the field. Prep is where the job is won or lost.
Ask what washing, scraping, sanding, patching, caulking, and priming are included, and how much surface repair is covered. A quote that lists paint and labor but not surface work is a price for covering a problem. Compare prep descriptions line by line before comparing totals.
Mildew usually appears where air movement is poor: under eaves, behind shrubs, on walls shaded all day. Ask whether the source was investigated — a leaking gutter, a failed caulk joint, irrigation hitting the wall — and what treatment is proposed. Painting over active mildew brings it back.
Ask which products are specified for each material. Fiber cement, vinyl, and wood each need different preparation and different coatings, and trim usually fails before the field does. Product names, sheens, and coat counts belong in the written scope.
Ask how the schedule accounts for afternoon thunderstorms and for the heat of direct sun on a wall. Coatings applied to a hot surface can dry too fast to bond. Ask how surfaces are protected between coats and whether the crew returns after weather delays.
- What cleaning, scraping, patching, caulking, and priming are included? - Was the source of any mildew investigated? - Which products and sheens are specified for each material? - How is the surface prepared and checked before coating? - How does the schedule handle summer storms? - What does the warranty cover, and for how long?
This page does not estimate cost or specify products for a particular property. Coating performance depends on the substrate, moisture, preparation, and application, and lead-safe requirements apply to older housing, which should be confirmed with the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 2.8 million residents and 1.1 million households. About 65.9% of occupied homes are owner-occupied, and about 65.9% of housing units are single-family detached, so most exterior painting happens on private homes. About 29.1% of housing units were built before 1980, so lead-based paint is less likely than in older metros but still possible in the oldest neighborhoods. NOAA's Charlotte station records January averaging 42.1°F, July 80.1°F, and about 43.6 inches of precipitation a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 42.1°F | NOAA NCEI |
| July mean temperature | 80.1°F | NOAA NCEI |
| July precipitation | 3.74 in. | NOAA NCEI |
| Annual precipitation | 43.6 in. | NOAA NCEI |
| Metro population | 2,768,407 | U.S. Census Bureau |
| Single-family detached share | 65.9% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Reviewed on 2026-11-18.