Houston cooling is a moisture problem as much as a temperature problem. Sizing, airflow, and drainage decide how the house feels.
Houston cools for most of the year. July at Intercontinental averages 85.1°F, and the metro gets about 51.8 inches of rain a year, so the system is removing moisture as much as heat. A unit that is oversized for the house can cool the air quickly and still leave the rooms feeling damp, because it never runs long enough to dehumidify.
Ask whether a load calculation was performed and what it assumed about insulation, windows, and ductwork. Then ask how the proposed airflow matches the ducts that exist. A replacement that increases capacity without addressing restrictive ducts can raise static pressure and shorten equipment life.
Ask how the proposal addresses moisture: runtime, fan settings, duct sealing, or dedicated dehumidification. A system short-cycling at a low thermostat setting may satisfy temperature and not humidity. The right question is what indoor conditions the design targets, not what temperature the thermostat shows.
Cooling produces a lot of water in this climate, and a clogged or undersized drain line can damage a ceiling before anyone notices. Ask how the condensate is routed, whether there is a secondary pan and switch, and who inspects the drain during maintenance.
Ask what a maintenance visit includes: filter, coil cleaning, drain check, refrigerant and electrical measurements, and a written record of readings. For a repair decision, ask which measurements support the diagnosis and whether the same evidence would justify replacement. Get the comparison in writing.
- Was a load calculation performed, and what did it assume? - How does the proposal address humidity, not just temperature? - Do the existing ducts match the proposed airflow? - How is condensate routed and protected? - What measurements support the repair recommendation? - What do the parts and labor warranties cover?
This page does not diagnose an HVAC system remotely and does not publish local prices. Equipment selection, refrigerant handling, and permit requirements must be confirmed on site by a qualified professional and the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 7.4 million residents and 2.7 million households. About 61.2% of occupied homes are owner-occupied, and about 62.4% of housing units are single-family detached. About 31.5% of housing units were built before 1980. NOAA's Intercontinental station records January averaging 53.8°F, July 85.1°F, and about 51.8 inches of precipitation a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 53.8°F | NOAA NCEI |
| July mean temperature | 85.1°F | NOAA NCEI |
| Annual precipitation | 51.8 in. | NOAA NCEI |
| Metro population | 7,442,788 | U.S. Census Bureau |
| Owner-occupied share | 61.2% | U.S. Census Bureau |
| Housing units built before 1980 | 31.5% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Mapped in OpenStreetMap
OpenStreetMap contributors have mapped 36 hvac entries inside the Houston-Pasadena-The Woodlands, TX CBSA; 34 have a name. This is a map-coverage indicator, not a count of all licensed hvac businesses in the metro.
OSM coverage varies by area: a low count can mean low mapping activity, not a small market. OpenStreetMap does not record contractor licenses. To check a license, use the Texas TDLR license search. TDLR licenses HVAC and electrical contractors.
Query: craft=hvac. Snapshot: 2026-11-17. Data:
© OpenStreetMap contributors,
ODbL 1.0. CBSA boundary:
U.S. Census Bureau, 2023.
Reviewed on 2026-11-18.