The resource is strong. The test is whether the array and the roof are built for the storm season.
Oklahoma City has one of the better solar resources in the country, plenty of detached housing and a lot of sun. It also has a storm season that produces hail capable of damaging roofs, vehicles and outdoor equipment, and wind that tests every attachment on a building. Those two facts are not in conflict, but they do mean that a solar decision here should be made on engineering rather than on annual production alone. The questions that matter are what the equipment is rated for, how the penetrations are sealed, and whether the roof beneath has enough life left to justify the array.
Modules carry an impact rating, and it is worth asking for it explicitly rather than assuming all panels are equivalent. The rating describes resistance under test conditions; it does not make an array immune to a severe event, and a storm that damages shingles can also damage glass and mounting. Ask what the rating is, whether the mounting hardware is rated similarly, and how claims are handled if a storm damages the array — including whether the installer will document the system's condition beforehand so the difference after a storm is provable.
The mounting has to be engineered for the wind loads applicable to the location, and the failure that matters in practice is not the panel leaving the roof but the penetration leaking months later. Ask what design wind speed the system is engineered for, how each penetration is flashed, and whether the array is set back from the ridges and edges where wind pressure is highest. A photograph of the finished flashing is worth more than a verbal assurance, and it is worth keeping for the next storm claim.
Module output falls as cell temperature rises, and in a hot summer the cells run well above air temperature. Flush mounting on a hot shingle roof makes that worse. Ask what cell temperature the production estimate assumes, whether the design allows airflow behind the modules, and how the seasonal profile looks. A quote built from a generic sun-hours figure will overstate what an August afternoon delivers.
With 45.1% of metro housing built before 1980, the roofs receiving quotes are a mix of original coverings and later replacements, and a hail-prone market means many roofs have already been replaced once. Ask how old the covering is, what its remaining service life is judged to be, and whether the installer will put that in writing. If the roof is within a few years of replacement, doing it first avoids paying twice for the removal and reinstallation.
Ask who files the interconnection request, what the expected review window is, how exported energy is credited under the current rules, what fixed charges remain on the bill, and what happens to accumulated credits at the end of a period. Confirm it with the utility rather than relying on a sales summary. Ask too for the self-consumed savings and the export credit to be valued separately, since combining them into a single annual figure hides which one is actually carrying the return.
- What is the hail impact rating of the modules and the mounting? - What design wind speed is the system engineered for, and how are penetrations flashed? - What cell temperature and weather data are used in the production estimate? - How old is the roof, and what is its remaining life in writing? - Who documents the system's condition before and after a storm? - Who files interconnection, and how are exports credited under current rules?
No prices, incentives or production figures are published here, because none can be produced honestly without a site assessment. Roof condition and structural capacity require inspection, and insurance, financial and regulatory questions belong to a qualified adviser, the insurer and the utility.
The 2024 ACS 5-year estimates count about 1.46 million residents in 571,211 households across 622,187 housing units, with 63.6% owner-occupied and 71.8% single-family detached — a favorable combination for rooftop solar, since most households control their own roof. About 45.1% of units were built before 1980. A climate station is not reported for this metro in the site dataset, so no temperature or precipitation normals appear on this page.
| Indicator | Value | Source |
|---|---|---|
| Single-family detached share | 71.8% | U.S. Census Bureau |
| Owner-occupied share | 63.6% | U.S. Census Bureau |
| Housing units built before 1980 | 45.1% | U.S. Census Bureau |
| Housing units | 622,187 | U.S. Census Bureau |
| Metro households | 571,211 | U.S. Census Bureau |
| Metro population | 1,463,267 | U.S. Census Bureau |
No climate normals are shown because no station record is held for this metro in the site dataset. Hail and wind exposure vary by storm season rather than by a stable annual average.
Reviewed on 2026-11-18.