High electricity prices make solar attractive here. The export rules make self-consumption the point.
Silicon Valley is one of the few places where the economics of solar are carried by the price of the electricity being avoided rather than by the quality of the resource. The sun is excellent, but what makes a system pay is the retail rate it offsets. California's rules for exported power changed substantially, reducing what a household is paid for the electricity it sends to the grid, and that has shifted the design question from maximum production to maximum self-consumption. With 59.0% of metro housing built before 1980, roof and panel condition add a second layer.
Under the current California structure, exported electricity is compensated at a value that is generally well below the retail rate, and the rate varies by time of day. That means an array sized purely to offset annual consumption can produce a lot of low-value exports. Ask for a monthly and hourly view of production against household consumption, not one annual total, and ask what share of production is expected to be self-consumed. Then ask how the design encourages consumption when the array is producing — an EV charged at midday, for instance, is a different proposition from one charged at night.
Where exports are worth little, storing production to use in the evening is the obvious counterweight, and it is why storage is discussed in nearly every project here. Ask what the battery is expected to do — evening load, backup, or both — what it costs per kilowatt-hour of usable capacity, whether it qualifies for any current incentive, and how the system behaves when it is full or depleted. Storage is not automatically worth it, and a proposal that adds it without showing the modelled effect on the bill is asking you to take it on faith.
A house built in 1965 may have a 100-amp service and a full panel, and adding solar plus storage plus a car charger may require a service upgrade before any of it works. Ask whether the main service is adequate, what an upgrade would cost and involve, whether the utility needs to be involved, and how long that takes. Putting the electrical work in the same project as the array is usually simpler than coming back to it later.
A large share of the local stock has tile or composition roofs, and tile requires mounting details designed for it — walking on it and drilling it carelessly causes damage that appears later as a leak. Ask what the covering is, how old it is, how the installer mounts on that specific material, and how broken tiles will be replaced. If the roof is near the end of its life, sequencing replacement first avoids paying twice for disconnection and reinstallation.
Established neighborhoods have large trees, and in denser parts of the valley a neighbor's second storey can matter as much. Ask which hours of the year were modelled, whether the design uses per-panel electronics so one shaded section does not pull down a string, and what happens to production if a tree is removed or a neighbor builds. With export value reduced, a shaded array is doubly penalised because the production lost was worth the most at the time it was lost.
- What share of production is expected to be self-consumed, and at what times? - How is exported energy valued under current rules, and does the value vary by hour? - If storage is proposed, what does it cost per usable kilowatt-hour and what does it change? - Is the main electrical service adequate, and what does an upgrade involve? - What is the roof covering and its remaining life, and how is mounting done on it? - Which hours of the year were shaded, and how is the array wired?
No prices, incentives or production figures are published here, because none can be produced honestly without a site assessment. Roof condition, structural capacity and service capacity require inspection, and financial and regulatory questions belong to a qualified adviser and the utility.
The 2024 ACS 5-year estimates count about 1.97 million residents in 679,914 households across 720,159 housing units, with 55.5% owner-occupied and 51.6% single-family detached — the low detached share means a significant part of the stock is in attached or multi-unit buildings where roof control is not guaranteed. About 59.0% of units predate 1980. A climate station is not reported for this metro in the site dataset, so no temperature or precipitation normals appear on this page.
| Indicator | Value | Source |
|---|---|---|
| Housing units built before 1980 | 59.0% | U.S. Census Bureau |
| Single-family detached share | 51.6% | U.S. Census Bureau |
| Owner-occupied share | 55.5% | U.S. Census Bureau |
| Housing units | 720,159 | U.S. Census Bureau |
| Metro households | 679,914 | U.S. Census Bureau |
| Metro population | 1,969,337 | U.S. Census Bureau |
No climate normals are shown because no station record is held for this metro in the site dataset. Electricity tariffs and export values change and must be confirmed with the utility for the current interconnection period.
Reviewed on 2026-11-18.