Half a century of housing stock means many St. Louis panels were sized for a different house than the one standing today.
About 58.3% of St. Louis metro housing units were built before 1980, according to ACS estimates, and many of those houses have had several rounds of electrical work since. Each round connected new loads to whatever was already there. The result is a system where the panel, the wiring methods, and the actual demand may all come from different decades.
Ask what the existing service rating is and whether a load calculation was done for the proposed change. Central air, a heat pump, an EV charger, or a finished basement can each push an older service past its practical limit. The answer may be a dedicated circuit, a panel change, a service upgrade, or a different equipment choice.
Older homes often contain more than one wiring method, and past remodels can leave junctions inside walls that nobody documented. Ask what wiring type serves the affected circuit, how the new work will connect, and whether the connection is appropriate for both. If a finding is unexpected, ask for a written change order rather than a verbal adjustment.
Ask what was inspected inside the panel: breaker condition, bus connections, grounding and bonding, and any signs of heat or moisture. Age alone does not condemn a panel, and a new panel does not fix an overloaded circuit. Get the finding in writing so the recommendation follows evidence.
Ask who files the permit, who schedules the inspection, and what restoration is included after walls are opened. Plaster and lath repair is slower than drywall patching and is often excluded. Put the restoration scope and the permit responsibility in writing before work begins.
- Which tests support the diagnosis? - What is the service rating, and was a load calculation performed? - What wiring types are present on the affected circuit? - What was inspected inside the panel? - Who files permits and schedules inspections? - Is plaster repair included, and to what finish?
This page does not assess electrical safety remotely and does not publish local prices. Electrical hazards should be handled by a qualified professional, and permit and inspection requirements must be confirmed with the authority responsible for the address.
The 2024 ACS 5-year estimates put the metro at about 2.8 million residents and 1.2 million households. About 70.4% of occupied homes are owner-occupied, and about 70.6% of housing units are single-family detached. About 58.3% of housing units were built before 1980 — the highest pre-1980 share among the metros covered by hand-written pages so far. NOAA's St. Louis station records January averaging 32.1°F, July 80.4°F, and about 41.7 inches of precipitation a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 32.1°F | NOAA NCEI |
| July mean temperature | 80.4°F | NOAA NCEI |
| Annual precipitation | 41.7 in. | NOAA NCEI |
| Metro population | 2,810,850 | U.S. Census Bureau |
| Owner-occupied share | 70.4% | U.S. Census Bureau |
| Housing units built before 1980 | 58.3% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Reviewed on 2026-11-18.