Paint here fails from moisture that never quite leaves, and from a north wall that never quite dries.
In a climate this humid, painting is a moisture-management job. Wood trim holds water after rain and releases it slowly, and a coating applied over wood that is still damp will trap that moisture and blister from behind. North and east elevations stay wet longer and grow mildew, while south and west walls take intense sun that chalks and fades the film. With 46.1% of the metro's housing built before 1980, many exteriors carry several layers of older paint over original wood, and the question on most jobs is not which color but how much of the failing material has to come off before anything new goes on.
Manufacturers publish a maximum moisture content for the substrate before coating, and in this climate that number is easy to exceed, especially on a shaded wall that received rain two days ago. A crew that arrives on schedule regardless will paint damp wood and the failure will appear next season, usually as blistering around the joints. Ask how the contractor checks moisture, what they do if the wall is not ready, and whether the schedule has weather contingency built in. A painter who will not say "not today" is a painter who will cost you a second job.
Mildew appears as dark staining, often in a pattern that follows the shade, and it grows on paint films as well as on bare wood. Washing with an appropriate cleaner and letting the surface dry is part of preparation, not a substitute for it, and painting over active mildew simply seals it under a new film that will discolour from beneath. Ask what the cleaning step involves, whether a mildew-resistant coating is being specified for the shaded elevations, and whether the source — often a sprinkler hitting the wall, a downspout discharging beside it, or dense shrubs against the siding — will be corrected.
Window sills, the bottom courses of siding, the ends of fascia and the joints where trim meets masonry are where water sits longest and wood fails first. Soft wood cannot be painted back into service; it has to be repaired or replaced, and that work is often outside a painter's trade. Ask who is responsible for carpentry, what the standard is for deciding whether a board is sound, and whether the estimate prices repairs as a contingency or excludes them entirely. On older houses, the difference between a good job and a cheap one is usually in this line item.
Nearly half the housing stock predates 1978, so any preparation involving sanding or scraping may generate lead dust. The practical questions are whether surfaces will be tested, how chips and dust are contained, how debris leaves the site, and what documentation the contractor provides. This applies inside as well as outside, and it matters most in the houses where the most paint layers have to come off. A vague answer here is worth treating as a real answer.
South and west walls chalk and fade while north and east walls grow mildew, and the two problems want different products. A single specification for the whole building is a compromise that suits neither. Ask whether coatings are specified by elevation, whether the colorfastness of the chosen product suits the exposure, and whether the sheen is appropriate — a higher sheen resists mildew better but shows substrate imperfections more, which matters on older siding.
- How is substrate moisture checked, and what happens if the wall is not ready? - What cleaning and mildew treatment is included before coating? - Who handles carpentry where wood is soft, and is it priced or excluded? - Which elevations get a different product or sheen, and why? - For pre-1978 housing, how is lead-safe work handled and documented? - What is the weather contingency if the schedule slips?
No prices are published and no assessment of a specific exterior is made here. Rot, flashing failures and moisture intrusion should be identified by someone who inspects the assembly, because paint over a wet or decaying substrate fails regardless of the product.
The 2024 ACS 5-year estimates describe about 1.34 million residents in 522,879 households and 580,185 housing units, with 60.5% owner-occupied and 69.9% single-family detached — a metro with a large detached stock and correspondingly large exterior surface area to maintain. About 46.1% of units predate 1980. A climate station is not reported for this metro in the site dataset, so no temperature or precipitation normals appear on this page.
| Indicator | Value | Source |
|---|---|---|
| Housing units built before 1980 | 46.1% | U.S. Census Bureau |
| Single-family detached share | 69.9% | U.S. Census Bureau |
| Owner-occupied share | 60.5% | U.S. Census Bureau |
| Housing units | 580,185 | U.S. Census Bureau |
| Metro households | 522,879 | U.S. Census Bureau |
| Metro population | 1,341,924 | U.S. Census Bureau |
No climate normals are shown because no station record is held for this metro in the site dataset. Humidity and sun exposure vary by orientation and by the amount of shade on the lot.
Reviewed on 2026-11-18.