Miami coatings fail from sun and salt before they fail from rain. Surface preparation and product choice carry the job.
A Miami exterior faces UV intensity, salt air, and about 67.4 inches of rain a year, with July alone averaging 7.36 inches. Paint here chalks and fades from the sun, lifts where salt and moisture have worked into the surface, and grows mildew in shaded spots that never dry. That makes the coating system and the preparation the two things worth comparing.
Ask how the surface is cleaned, what is done about chalking and efflorescence, and how cracks and hollow areas are repaired. Stucco over block behaves differently from wood or fiber cement, and a coating chosen for one may fail on the other. Ask what preparation method is used on each material.
Mildew usually appears where air movement is poor: under eaves, behind hedges, on walls that face away from the sun. Ask whether the source was investigated — irrigation hitting the wall, a leaking gutter, a plant held against the surface — and what treatment is proposed. Painting over active mildew brings it back quickly in this climate.
Ask which products are specified and why: elastomeric or masonry coatings, acrylics for trim, and appropriate sheens for each surface. Some coatings are marketed on flexibility or thickness; ask what the manufacturer requires for surface preparation and whether the proposal meets it. Product names and coat counts belong in the written scope.
Ask how the schedule accounts for the rainy season and for the heat of direct sun on a wall. Coatings applied to a hot surface can dry too fast to bond properly. Ask how surfaces are protected between coats and whether the crew returns to finish after weather delays.
- How is each surface cleaned and prepared? - How are chalking, efflorescence, and cracks addressed? - Was the source of any mildew investigated? - Which products and sheens are specified for each material? - Does the application meet the manufacturer's preparation requirements? - How does the schedule handle rain and heat?
This page does not estimate cost or specify products for a particular property. Coating performance depends on the substrate, moisture, salt exposure, preparation, and application, and any requirements for a shared building should be confirmed with the association or the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 6.2 million residents and 2.3 million households. About 60.5% of occupied homes are owner-occupied, and about 41.0% of housing units are single-family detached, so many exteriors belong to shared buildings where the association sets the specification. About 45.4% of housing units were built before 1980. NOAA's Miami station records January averaging 68.6°F, July 84.1°F, and about 67.4 inches of precipitation a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 68.6°F | NOAA NCEI |
| July mean temperature | 84.1°F | NOAA NCEI |
| July precipitation | 7.36 in. | NOAA NCEI |
| Annual precipitation | 67.4 in. | NOAA NCEI |
| Metro population | 6,249,291 | U.S. Census Bureau |
| Single-family detached share | 41.0% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Reviewed on 2026-11-17.