In a city built on hills under a heavy canopy, finding a genuinely unshaded roof plane is the first task.
Pittsburgh is a workable solar market with two local obstacles that are easy to underestimate. The first is shade: the region is heavily wooded, the city is built on hills where a neighbor's roof or a slope itself can block the low winter sun, and many properties have a tree canopy that only partly clears during the day. The second is the age of the roofs. With 73.1% of housing built before 1980 — the oldest stock on this site — the covering under a proposed array often needs assessing as seriously as the array itself.
On flat ground the shade question is about vegetation. Here it can be the terrain, a neighboring building on higher ground, or a tree that belongs to someone else. The winter sun sits low, so an obstruction that is irrelevant in June can be decisive in December and January — the months when production is already at its floor. Ask which hours of the year were modelled, whether the study accounts for the low winter sun, whether per-panel electronics are used, and what happens to production if a neighboring tree grows.
Forty-four inches of snow falls in a typical year, and snow on glass blocks production entirely until it leaves. On a steeper roof it slides; on a shallow one it can sit for days. Ask whether the production estimate deducts for snow cover, what pitch the array is on, and whether the design assumes the homeowner will clear panels. Climbing a snowy roof is dangerous work, and a plan that depends on it is not really a plan.
Ask how old the covering is, how many layers are present, what the remaining service life is judged to be, and whether the installer will put that in writing. On a slate roof, mounting is a specializt problem and the slate itself may be worth preserving. On older houses the deck and attic ventilation deserve attention at the same time, because a hot or moist attic shortens the life of the covering with or without solar.
Module output falls as cell temperature rises, and while July here averages 73.2°F rather than a desert figure, cells on a sunlit roof still run well above air temperature. Ask what cell temperature the estimate assumes, whether the mounting leaves an air gap, and for a monthly production profile compared with household consumption. A proposal showing flat output year-round is not modelling this latitude.
Ask who files the interconnection request, what the expected review window is, how exported energy is credited under the current rules, what fixed charges remain, and what happens to accumulated credits at the end of a period. Confirm it with the utility rather than relying on an installer's summary. Where exports are credited below retail, the value shifts toward what the household consumes while the array is producing, which changes how the system should be sized.
- Does the shade study account for the low winter sun and for terrain, not just trees? - Does the production estimate deduct for snow cover, and what pitch is the array on? - How old is the roof, how many layers, and what is its remaining life in writing? - If the roof is slate, how is mounting handled and who accepts responsibility for it? - What monthly production profile is projected against consumption? - Who files interconnection, and what is the current credit worth relative to retail?
No prices, incentives or production figures are published here, because none can be produced honestly without a site assessment. Roof condition and structural capacity require inspection, and financial and regulatory questions belong to a qualified adviser and the utility.
The 2024 ACS 5-year estimates count about 2.44 million residents in 1,061,705 households across 1,174,149 housing units, with 70.7% owner-occupied and 68.0% single-family detached. About 73.1% of units were built before 1980, which is why roof condition leads this page. NOAA's station records January at 28.8°F, July at 73.2°F and 44.1 inches of snow a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 28.8°F | NOAA NCEI |
| July mean temperature | 73.2°F | NOAA NCEI |
| Annual snowfall | 44.1 in. | NOAA NCEI |
| Annual precipitation | 39.6 in. | NOAA NCEI |
| Housing units built before 1980 | 73.1% | U.S. Census Bureau |
| Owner-occupied share | 70.7% | U.S. Census Bureau |
Monthly means are 30-year station averages. Shade from terrain and canopy is property-specific and cannot be inferred from climate figures.
Reviewed on 2026-11-18.