The roof is more likely to be damaged by hail than to wear out — and the damage is invisible from the ground.
San Antonio sits in one of the most hail-prone parts of the country, and that single fact organizes the roofing market here. Hail bruises the mat of an asphalt shingle, knocks granules loose and shortens its life without necessarily tearing the surface — so a roof can look acceptable from the driveway and still be at the end of its service life two summers later. Add a July mean of 84.8°F at the reference station, a long cooling season and an attic that becomes a furnace, and the two forces working on a roof here are impact from above and heat from below.
The visible evidence is granule loss, dents in the soft metal — vents, valleys, gutter aprons, the caps on a ridge — and bruising that shows as a soft spot when the shingle is felt by hand. That is why an inspection from the ground proves nothing, and why the condition of the roof should be documented before it is replaced rather than after. Ask whether the contractor inspects the metal components as well as the shingles, how the damage will be photographed and recorded, and whether they will meet the adjuster on the roof.
In this climate the attic is the second roof problem. A dark shingle covering over an under-vented attic raises the temperature of everything inside it, including the ductwork and the insulation, and the air conditioning pays for that all evening. Radiant barriers and improved ventilation are the standard responses, and both are far cheaper to install during a replacement than afterwards. Ask whether the deck will be evaluated for a radiant barrier, how intake and exhaust ventilation are balanced, and whether the ducts will be inspected while the roof is open.
Wind damage concentrates at the perimeter: ridge and hip caps, rake edges, and the first courses at the eave. It also finds anything that was already loose, which is why a roof that survived several storms can lose a ridge cap in the next one. The difference between two quotes is often in those details rather than in the shingle. Ask what the nailing pattern is, how the edge metal and ridge are specified, and whether the deck will be inspected and re-nailed while it is exposed.
Because so much work here is insurance-driven, the documentation matters as much as the installation. Photographs, a written scope, and a clear separation between storm damage and ordinary wear are what an adjuster needs, and code-required items — decking, flashing, ventilation upgrades — are sometimes treated separately from the damage itself. Ask how the scope distinguishes damage from code upgrades, who communicates with the insurer, and what happens if the approved scope is less than the roof needs.
In hail country the deck matters as much as the covering. Re-decking is sometimes needed where panels have been weakened by moisture, and the condition of the decking decides whether the new roof performs. A radiant barrier is also cheapest to install at this moment. Ask whether the deck will be inspected and repaired as part of the scope, whether damaged panels are replaced or merely covered, and whether a radiant barrier is included or quoted separately.
- Was the inspection done on the roof, including the metal components? - How will the damage be documented for the insurer? - What is specified for edge metal, ridge caps and nailing pattern? - Will the deck be inspected and re-nailed while it is open? - Is a radiant barrier or ventilation upgrade part of the scope? - How are code-required items separated from storm damage in the quote?
No prices are quoted and no roof is assessed here. Whether damage is covered, and to what extent, is the insurer's determination, and structural questions require inspection by someone qualified to judge the assembly.
The 2024 ACS 5-year estimates describe about 2.66 million residents in 967,488 households and 1,057,823 housing units, with 63.3% owner-occupied and 66.1% single-family detached. About 32.7% of units predate 1980. At the San Antonio reference station, January averages 52.2°F and July 84.8°F, on 32.4 inches of annual precipitation with small amounts of snow in an average year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 52.2°F | NOAA NCEI |
| July mean temperature | 84.8°F | NOAA NCEI |
| Annual precipitation | 32.4 in. | NOAA NCEI |
| Metro population | 2,662,733 | U.S. Census Bureau |
| Owner-occupied share | 63.3% | U.S. Census Bureau |
| Housing units built before 1980 | 32.7% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. The long cooling season shown here is what makes attic heat a roofing issue, and hail risk is a separate exposure that no average can express.
Reviewed on 2026-11-18.