Seattle damage is rarely one storm. It is months of rain finding the same weak point until something gives.
Seattle gets about 39.3 inches of rain a year, but the total is not the point — the duration is. Rain falls steadily from October into spring, so a clogged gutter, a failed flashing, or a window seal is tested for weeks rather than minutes. By the time a ceiling stains, the water has often been entering for a while.
A scope should identify whether the water came from the roof, a gutter, a window, a wall assembly, a supply line, or groundwater, and whether it is still entering. Ask how the source was confirmed and what repair is needed before reconstruction begins. Drying a wall that is still being rained on wastes the effort.
Many homes here sit over crawlspaces, and months of rain keep the ground under them wet. Ask whether the crawlspace was inspected with moisture readings, how standing water was removed, and how the space will be dried and left afterwards. Vapor barrier condition and drainage at the foundation matter as much as the drying equipment.
Outdoor air is often cool and near saturation, which slows evaporation. Ask how the plan accounts for that and whether dehumidification is included rather than fans alone. Ask for moisture readings with locations and dates, equipment placement, and the dry standard used to close the job.
Damp assemblies in a cool climate can support mold growth within days. Ask how the assessment addresses materials that stayed wet, what will be removed rather than dried, and how the work area is contained. If visible growth is present, ask what remediation scope is proposed and who verifies it.
- What is the suspected entry point, and how was it confirmed? - Was the crawlspace or wall cavity measured, not just the visible surface? - Is dehumidification included, not only air movement? - Which materials will be removed rather than dried? - How will the work be documented for an insurer? - Is reconstruction part of this scope or separate?
This guide does not assess an active loss remotely and does not publish local prices. If water is still entering or there is an electrical safety concern, contact the appropriate emergency service. Coverage and remediation requirements depend on the property, the policy, and the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 4.1 million residents and 1.6 million households. About 60.0% of occupied homes are owner-occupied, and about 42.7% of housing units were built before 1980. NOAA's Sea-Tac station records January averaging 42.8°F, July 67.1°F, and about 39.3 inches of precipitation a year, with most of it falling between October and April.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 42.8°F | NOAA NCEI |
| January precipitation | 5.78 in. | NOAA NCEI |
| July precipitation | 0.6 in. | NOAA NCEI |
| Annual precipitation | 39.3 in. | NOAA NCEI |
| Metro population | 4,061,920 | U.S. Census Bureau |
| Housing units built before 1980 | 42.7% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Reviewed on 2026-11-17.