Seattle, WA · metro guide
HVAC in Seattle: Mild Summers, Cold Damp, and What to Compare
Seattle rarely needs extreme cooling, but it does need heat for a long damp season. Sizing and air quality matter more than raw capacity.
Metro snapshot
Seattle in numbers
Sources named below each block
- Population
- 4.1M
- Households
- 1.6M
- Housing units
- 1.7M
- People / household
- 2.53
- population ÷ households
Owner-occupied homes 60%
The rest are rented. Owners are the ones who commission most exterior work.
Single-family detached 56%
Detached houses carry their own roof, gutters and exterior walls.
Built before 1980 43%
Older housing stock shapes what fails first: gutters, flashing, pipe material.
Season
The year in Seattle
- Precipitation
- 39.3 in
- Snowfall
- 6.3 in
Average temperature by month, °F — the shape of the year is what decides when exterior work gets done.
Precipitation by month, inches.
Snowfall by month, inches.
| Month | Average temperature (°F) | Precipitation (in) | Snowfall (in) |
|---|---|---|---|
| January | 42.8°F | 5.78 in | 1.8 in |
| February | 44.0°F | 3.76 in | 2.2 in |
| March | 47.1°F | 4.17 in | 0.4 in |
| April | 51.3°F | 3.18 in | 0.0 in |
| May | 57.5°F | 1.88 in | 0.0 in |
| June | 62.0°F | 1.45 in | 0.0 in |
| July | 67.1°F | 0.60 in | 0.0 in |
| August | 67.4°F | 0.97 in | 0.0 in |
| September | 62.6°F | 1.61 in | 0.0 in |
| October | 53.8°F | 3.91 in | 0.0 in |
| November | 46.5°F | 6.31 in | 0.2 in |
| December | 42.0°F | 5.72 in | 1.7 in |
NOAA 1991–2020 climate normals, station SEATTLE TACOMA INTL AP, WA US (USW00024233). Station observations, not a metro-wide average — a metro that spans a mountain range can differ by more than this record shows.
Population, households and housing shares: U.S. Census Bureau, American Community Survey 2024 5-year estimates, metropolitan statistical area.

Seattle's climate is mild on paper. July at Sea-Tac averages 67.1°F, and January averages 42.8°F. What the numbers do not capture is the length of the damp season and the number of homes here without air conditioning at all. About 42.7% of metro housing units were built before 1980, according to ACS estimates, so many were built with heating systems and ventilation designed for a different era.
Sizing for a mild climate
Ask whether a load calculation was performed and what it assumed about insulation, windows, and air sealing. In a mild climate, oversizing is easy to sell and hard to live with: short cycles, uneven temperatures, and poor dehumidification. A heat pump sized to the actual load usually performs better than one chosen by square footage.
Heat pumps and cold-weather performance
Ask what the proposed equipment's capacity is at the temperatures this region actually sees, and how the system handles defrost and backup heat. Ask what happens during a cold snap and whether the design relies on auxiliary resistance heat. Those details decide comfort and operating behavior in February.
Ventilation and indoor moisture
A tight house in a damp climate needs intentional ventilation. Ask how the design addresses fresh air, bathroom and kitchen exhaust, and humidity in winter. Cooling capacity alone does not solve indoor moisture, and running bath fans into an attic or crawlspace moves the problem rather than removing it.
Ducts and distribution
Ask whether the existing ducts were inspected and whether they match the proposed airflow. Leaky ducts in a vented crawlspace or attic lose conditioned air before it reaches the room. If duct sealing or replacement is excluded, the estimate is not comparable to one that includes it.
Questions to ask before you decide
Where this page stops
This page does not diagnose an HVAC system remotely and does not publish local prices. Equipment selection, refrigerant handling, and permit requirements must be confirmed on site by a qualified professional and the responsible local authority.
Seattle metro context
The 2024 ACS 5-year estimates put the metro at about 4.1 million residents and 1.6 million households. About 60.0% of occupied homes are owner-occupied, and about 56.0% of housing units are single-family detached, a lower share than most metros in this set. About 42.7% of housing units were built before 1980. NOAA's Sea-Tac station records January averaging 42.8°F, July 67.1°F, and about 39.3 inches of precipitation a year, most of it between October and April.
Seattle reference station and housing indicators
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 42.8°F | NOAA NCEI |
| July mean temperature | 67.1°F | NOAA NCEI |
| Annual precipitation | 39.3 in. | NOAA NCEI |
| Metro population | 4,061,920 | U.S. Census Bureau |
| Owner-occupied share | 60.0% | U.S. Census Bureau |
| Housing units built before 1980 | 42.7% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Frequently Asked Questions
How do I compare HVAC quotes in Seattle?
Compare the load calculation, equipment models and cold-weather capacity, duct work included, ventilation and exhaust work, electrical work, thermostat, permit handling, startup measurements, exclusions, and both equipment and labor warranties.
Do I need air conditioning in Seattle?
It is a comfort and resilience decision rather than a necessity in most years. A heat pump can provide both heating and cooling, so ask what the equipment costs to run in each mode and how it is sized.
How does a heat pump handle a cold snap?
Capacity drops as outdoor temperature falls, and some systems use auxiliary heat to cover the gap. Ask for the capacity at design temperature and how much auxiliary heat the design expects to use.
Why is ventilation important in a Seattle home?
A damp climate and tighter construction mean indoor moisture needs a planned exit. Ask how fresh air, bath and kitchen exhaust, and winter humidity are addressed by the design.
Should ductwork be replaced with a new system?
Not always, but it should be inspected. Leaky or undersized ducts can waste much of the equipment's capacity, so ask whether duct sealing or replacement is included or excluded.
What is the population of the Seattle metro area?
The U.S. Census Bureau's 2024 ACS 5-year estimates report about 4.1 million residents in the metro area. The figure describes regional scale, not the number of homes or providers.
Sources and review date
- American Community Survey 2024 5-year estimates (CBSA tables) — U.S. Census Bureau, 2024 ACS 5-year estimates.
- 1991–2020 station normals — SEATTLE TACOMA INTL AP, WA US (USW00024233) — NOAA National Centers for Environmental Information, 1991–2020 climate normals.
Reviewed on 2026-11-17.