A Tampa exterior is worked on by UV, salt, and rain in the same week. Prep and product choice decide how long it lasts.
Tampa gets about 49.5 inches of rain a year with 7.75 inches in July, and the sun between storms is strong. Most homes here are stucco or block, which absorb and release moisture slowly, and near the coast salt settles on every surface. That is why coatings fail from three directions at once, and why the preparation is the part of the job worth comparing.
Ask how the surface is cleaned, what is done about chalking and efflorescence, and how cracks and hollow areas are repaired. Efflorescence is a mineral deposit that appears when moisture moves through masonry; painting over it without treatment leads to early failure. Ask what preparation method is used on each material and how texture is matched after patching.
Mildew appears where air movement is poor and surfaces stay damp: under eaves, behind shrubs, on walls shaded all day. Ask whether the source was investigated — irrigation hitting the wall, a leaking gutter, a plant held against the surface — and what treatment is proposed. Painting over active mildew brings it back.
Ask which products are specified and why: masonry coatings for stucco and block, appropriate products for trim and doors, and sheens that suit each surface. Ask whether the preparation meets the manufacturer's requirements, because a warranty usually depends on it. Product names and coat counts belong in the written scope.
Ask how the schedule accounts for afternoon storms and for the heat of direct sun on a wall. Coatings applied to a hot surface can dry too fast to bond. Ask how surfaces are protected between coats and whether the crew returns to finish after weather delays.
- How is each surface cleaned and prepared? - How are chalking, efflorescence, and cracks addressed? - Was the source of any mildew investigated? - Which products and sheens are specified for each material? - Does the application meet the manufacturer's preparation requirements? - How does the schedule handle rain and heat?
This page does not estimate cost or specify products for a particular property. Coating performance depends on the substrate, moisture, salt exposure, preparation, and application, and lead-safe requirements apply to older housing, which should be confirmed with the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 3.3 million residents and 1.3 million households. About 67.9% of occupied homes are owner-occupied, and about 56.2% of housing units are single-family detached, so most exterior painting happens on private homes. About 39.0% of housing units were built before 1980. NOAA's Tampa station records January averaging 62.0°F, July 83.8°F, with 7.75 inches of rain in July and about 49.5 inches a year.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 62.0°F | NOAA NCEI |
| July mean temperature | 83.8°F | NOAA NCEI |
| July precipitation | 7.75 in. | NOAA NCEI |
| Annual precipitation | 49.5 in. | NOAA NCEI |
| Metro population | 3,304,691 | U.S. Census Bureau |
| Housing units built before 1980 | 39.0% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.
Reviewed on 2026-11-17.