Trades Across US Trades Across US

Tampa, FL · metro guide

Painting in Tampa: Sun, Salt, and Stucco

A Tampa exterior is worked on by UV, salt, and rain in the same week. Prep and product choice decide how long it lasts.

Metro snapshot

Tampa in numbers

Sources named below each block

Population
3.3M
Households
1.3M
Housing units
1.5M
People / household
2.48
population ÷ households

Owner-occupied homes 68%

The rest are rented. Owners are the ones who commission most exterior work.

Single-family detached 56%

Detached houses carry their own roof, gutters and exterior walls.

Built before 1980 39%

Older housing stock shapes what fails first: gutters, flashing, pipe material.

Season

The year in Tampa

Precipitation
49.5 in
Snowfall
0 in

Average temperature by month, °F — the shape of the year is what decides when exterior work gets done.

Precipitation by month, inches.

Monthly climate normals for Tampa
Month Average temperature (°F) Precipitation (in) Snowfall (in)
January 62.0°F 2.65 in 0.0 in
February 64.7°F 2.62 in 0.0 in
March 68.6°F 2.52 in 0.0 in
April 73.9°F 2.55 in 0.0 in
May 79.5°F 2.60 in 0.0 in
June 82.9°F 7.37 in 0.0 in
July 83.8°F 7.75 in 0.0 in
August 84.0°F 9.03 in 0.0 in
September 82.7°F 6.09 in 0.0 in
October 77.4°F 2.34 in 0.0 in
November 69.8°F 1.40 in 0.0 in
December 64.9°F 2.56 in 0.0 in

NOAA 1991–2020 climate normals, station TAMPA INTL AP, FL US (USW00012842). Station observations, not a metro-wide average — a metro that spans a mountain range can differ by more than this record shows.

Population, households and housing shares: U.S. Census Bureau, American Community Survey 2024 5-year estimates, metropolitan statistical area.

Painter applying exterior paint to a window while interior wall painting continues inside the home — Tampa–St. Petersburg–Clearwater

Tampa gets about 49.5 inches of rain a year with 7.75 inches in July, and the sun between storms is strong. Most homes here are stucco or block, which absorb and release moisture slowly, and near the coast salt settles on every surface. That is why coatings fail from three directions at once, and why the preparation is the part of the job worth comparing.

Stucco and block prep

Ask how the surface is cleaned, what is done about chalking and efflorescence, and how cracks and hollow areas are repaired. Efflorescence is a mineral deposit that appears when moisture moves through masonry; painting over it without treatment leads to early failure. Ask what preparation method is used on each material and how texture is matched after patching.

Mildew in a humid climate

Mildew appears where air movement is poor and surfaces stay damp: under eaves, behind shrubs, on walls shaded all day. Ask whether the source was investigated — irrigation hitting the wall, a leaking gutter, a plant held against the surface — and what treatment is proposed. Painting over active mildew brings it back.

Coating choice for sun and salt

Ask which products are specified and why: masonry coatings for stucco and block, appropriate products for trim and doors, and sheens that suit each surface. Ask whether the preparation meets the manufacturer's requirements, because a warranty usually depends on it. Product names and coat counts belong in the written scope.

Rainy season and scheduling

Ask how the schedule accounts for afternoon storms and for the heat of direct sun on a wall. Coatings applied to a hot surface can dry too fast to bond. Ask how surfaces are protected between coats and whether the crew returns to finish after weather delays.

Questions to ask before you sign

  • How is each surface cleaned and prepared?
  • How are chalking, efflorescence, and cracks addressed?
  • Was the source of any mildew investigated?
  • Which products and sheens are specified for each material?
  • Does the application meet the manufacturer's preparation requirements?
  • How does the schedule handle rain and heat?
  • Where this page stops

    This page does not estimate cost or specify products for a particular property. Coating performance depends on the substrate, moisture, salt exposure, preparation, and application, and lead-safe requirements apply to older housing, which should be confirmed with the responsible local authority.

    Tampa metro context

    The 2024 ACS 5-year estimates put the metro at about 3.3 million residents and 1.3 million households. About 67.9% of occupied homes are owner-occupied, and about 56.2% of housing units are single-family detached, so most exterior painting happens on private homes. About 39.0% of housing units were built before 1980. NOAA's Tampa station records January averaging 62.0°F, July 83.8°F, with 7.75 inches of rain in July and about 49.5 inches a year.

    Tampa reference station and housing indicators

    NOAA NCEI 1991–2020 normals for Tampa International Airport (USW00012842); U.S. Census Bureau ACS 2024 5-year estimates.
    IndicatorValueSource
    January mean temperature62.0°FNOAA NCEI
    July mean temperature83.8°FNOAA NCEI
    July precipitation7.75 in.NOAA NCEI
    Annual precipitation49.5 in.NOAA NCEI
    Metro population3,304,691U.S. Census Bureau
    Housing units built before 198039.0%U.S. Census Bureau

    Station normals are historical averages for one location, not a forecast. Census values describe the metro area, not an individual property.

    Frequently Asked Questions

    How often should a Tampa exterior be repainted?

    Sun and humidity accelerate fading and mildew, and coastal salt adds stress. Ask a contractor to assess the current coating's condition rather than relying on a fixed interval.

    What is efflorescence and how is it handled?

    It is a mineral deposit that appears when moisture moves through masonry and evaporates at the surface. It needs to be treated and the moisture source considered, not simply painted over.

    Why does mildew keep returning on one wall?

    That wall probably stays damp and shaded. Ask whether the moisture source was investigated — irrigation, a gutter, or vegetation holding water against the surface.

    Can exteriors be painted during the rainy season?

    It depends on the coating and the weather. Ask how the schedule accounts for afternoon storms and how surfaces are protected between coats.

    What should a painting estimate include?

    Surface preparation, products with names and sheens, number of coats, protection of adjacent surfaces, disposal, schedule, exclusions, and the warranty. Ask how much surface repair is covered.

    What is the population of the Tampa metro area?

    The U.S. Census Bureau's 2024 ACS 5-year estimates report about 3.3 million residents in the metro area. The figure describes regional scale, not the number of homes or providers.

    Sources and review date

    Reviewed on 2026-11-17.