Paint here is a moisture barrier over wood that wants to stay wet, and the color may not be entirely your decision.
The local painting problem is not sun and it is not frost. It is water that arrives as humidity and stays. Wood trim, siding, porch columns and the exposed structure under a raised house all absorb moisture from air that is damp most of the year, and paint that seals the surface without letting that moisture escape will blister from behind. Because 63.5% of the metro's housing predates 1980 and much of it is wood construction with original trim, most of the exteriors being painted now are working on their sixth or seventh coating over wood that has been wet and dry for a century.
Sills, the bottom courses of siding, porch steps and the ends of fascia hold water longest and fail first. Soft wood cannot be painted back into service, and coating it hides the problem for a season while it spreads. The question worth settling at the estimate stage is who handles carpentry: whether repairs are included, priced as a contingency, or excluded. On a raised house, the structure underneath is also exposed and is often the last thing anyone inspects. Ask whether the scope includes the underside and what the standard is for calling a board sound.
Coatings specify a maximum moisture content for the substrate, and in this climate that number is exceeded easily, particularly on a shaded wall or after a week of rain. A crew working to a calendar rather than to conditions will paint damp wood, and the failure appears later as blistering that looks like a product problem and is not. Ask how moisture is checked, what happens if the wall is not ready, and whether the schedule has weather contingency. On a house with deep overhangs and shaded elevations, the drying difference between walls can be days.
Some of the older buildings in the metro are brick with a stucco coat, and the relationship between those layers decides how the wall should be treated. A coating that seals the surface can trap moisture behind the stucco and cause it to detach, and repair then becomes a plastering job rather than a painting one. Ask whether cracks will be filled and with what, whether the proposed coating is breathable, and whether any hollow or drummy areas were sounded out before the estimate. Painting over failed stucco is the most expensive way to postpone a repair.
Large parts of the metro fall inside historic districts where exterior changes, and in some cases color, are reviewed by a commission. This is not a formality to discover after the paint is ordered. Ask whether the address is in a district, what the review process covers, and whether the contractor has worked under it before. It also helps to record the products and colors used, since matching an approved palette later is easier with a specification than with a photograph of a faded wall.
With two thirds of the housing built before 1980, lead paint is likely to be present on at least some surfaces, and any preparation involving sanding or scraping generates dust and chips. Ask whether surfaces will be tested, how debris is contained and removed, and what documentation is provided. This applies to interiors as well, and to the trim work that most often needs the heaviest preparation. A vague answer is a reason to keep looking.
- Is carpentry for soft or rotted wood included, priced, or excluded? - Does the scope include the structure under a raised house? - How is substrate moisture checked, and what happens if the wall is not ready? - For stucco, how are cracks and hollow areas assessed and repaired? - Is the address in a historic district, and does color require review? - How is lead-safe work handled and documented on pre-1978 surfaces?
No prices are published and no judgement is made about a specific building. Rot, failed stucco and structural moisture should be identified by someone who inspects the assembly, and historic district and lead requirements belong to the local authority.
ACS 2024 5-year estimates describe about 982,000 residents in 398,564 households and 465,148 housing units, with 60.6% owner-occupied and 58.4% single-family detached — the latter reflecting the number of doubles and multi-unit buildings in the stock. About 63.5% of units predate 1980, which is why original wood trim and multiple old coatings are the normal starting point. A climate station is not reported for this metro in the site dataset, so no temperature or precipitation normals appear here.
| Indicator | Value | Source |
|---|---|---|
| Housing units built before 1980 | 63.5% | U.S. Census Bureau |
| Single-family detached share | 58.4% | U.S. Census Bureau |
| Owner-occupied share | 60.6% | U.S. Census Bureau |
| Housing units | 465,148 | U.S. Census Bureau |
| Metro households | 398,564 | U.S. Census Bureau |
| Metro population | 981,662 | U.S. Census Bureau |
No climate normals are shown because no station record is held for this metro in the site dataset. Housing age is a proxy for the number of existing coatings and for the likelihood of lead paint, not for condition.
Reviewed on 2026-11-18.