Trades Across US Trades Across US

Detroit, MI · metro guide

Solar Panels in Detroit: Adequate Sun, Old Roofs, and Unshaded Lots

The resource is workable. In this metro the roof and the trees decide the project.

Metro snapshot

Detroit in numbers

Sources named below each block

Population
4.4M
Households
1.8M
Housing units
1.9M
People / household
2.47
population ÷ households

Owner-occupied homes 71%

The rest are rented. Owners are the ones who commission most exterior work.

Single-family detached 70%

Detached houses carry their own roof, gutters and exterior walls.

Built before 1980 66%

Older housing stock shapes what fails first: gutters, flashing, pipe material.

Season

The year in Detroit

Precipitation
34.3 in
Snowfall
45 in

Average temperature by month, °F — the shape of the year is what decides when exterior work gets done.

Precipitation by month, inches.

Snowfall by month, inches.

Monthly climate normals for Detroit
Month Average temperature (°F) Precipitation (in) Snowfall (in)
January 25.8°F 2.23 in 14.0 in
February 28.0°F 2.08 in 12.5 in
March 37.2°F 2.43 in 6.2 in
April 48.9°F 3.26 in 1.5 in
May 60.3°F 3.72 in 0.0 in
June 69.9°F 3.26 in 0.0 in
July 74.1°F 3.51 in 0.0 in
August 72.3°F 3.26 in 0.0 in
September 64.9°F 3.22 in 0.0 in
October 53.0°F 2.53 in 0.0 in
November 41.2°F 2.57 in 1.9 in
December 31.3°F 2.25 in 8.9 in

NOAA 1991–2020 climate normals, station DETROIT METRO AP, MI US (USW00094847). Station observations, not a metro-wide average — a metro that spans a mountain range can differ by more than this record shows.

Population, households and housing shares: U.S. Census Bureau, American Community Survey 2024 5-year estimates, metropolitan statistical area.

Solar panel installer mounting photovoltaic panels on a residential roof during a solar installation project — Detroit-Warren-Dearborn

Detroit is not a sun-belt market, but it is a workable one: the irradiance supports a system that offsets a meaningful share of annual consumption, and cooling load in summer is real. What complicates it is the housing. With 66.3% of units built before 1980, a large proportion of the roofs being considered are old, some already on a second layer, and the tree cover varies dramatically from block to block — from fully shaded streets to lots with almost no canopy at all. Both facts have to be established property by property before a panel layout means anything.

Production is seasonal and that is normal

A northern array produces most of its output between spring and autumn, with December and January close to the floor. That is a feature of latitude, not a defect, but it changes what the system is for: offsetting annual consumption rather than carrying the house through a January cold snap. Ask for a monthly production profile, compare it with the household's consumption, and be skeptical of any estimate that shows flat output through the year.

Snow, pitch and the question of clearing

Snow on an array blocks production entirely until it leaves, and how quickly it leaves depends on pitch and on temperature. On a steeper roof it slides; on a shallow one it can sit. Ask whether the production estimate already deducts for snow cover, what pitch the array is on, and whether the design assumes the homeowner will clear panels. Climbing a snowy roof is dangerous work that most households should not take on, so a plan that depends on it is not really a plan.

Roof age, layers and structure

Ask how old the covering is, how many layers are present, what the remaining service life is judged to be, and whether the installer will put that in writing. A house with two layers of shingles that is due for replacement is a poor host for an array, since the panels would have to come off and go back on. On older houses, the deck and the attic ventilation deserve attention at the same time, because a hot or moist attic shortens the life of the covering with or without solar.

Tree cover varies block by block

In some parts of the city the canopy is thin and roofs are wide open; in others, mature trees shade most of the afternoon. That variability is why a site-specific shade study matters more here than a general statement about the metro. Ask which hours of the year were modelled, whether the design uses per-panel electronics so one shaded section does not drag a string, and what happens if a neighboring tree grows or is removed.

The credit terms carry the economics

Ask who files the interconnection request, what the expected review window is, how exported energy is credited under the current rules, what fixed charges remain, and what happens to accumulated credits at the end of a period. Confirm it with the utility rather than relying on an installer's summary. When exported power is credited below retail, the value shifts toward what the household consumes while the array is producing, which changes how the system should be sized.

What to ask a Detroit installer

  • What monthly production profile is projected, and how does it compare with consumption?
  • Does the estimate deduct for snow cover, and what pitch is the array on?
  • How old is the roof, how many layers, and what is its remaining life in writing?
  • Which hours of the year were shaded, and how is the array wired?
  • Who files interconnection, and what is the current credit worth relative to retail?
  • What monitoring is included, and who is accountable if output falls short?
  • Where this page stops

    No prices, incentives or production figures are published here, because none can be produced honestly without a site assessment. Roof condition and structural capacity require inspection, and financial and regulatory questions belong to a qualified adviser and the utility.

    Detroit metro context

    The 2024 ACS 5-year estimates count about 4.38 million residents in 1,768,816 households across 1,926,157 housing units, with 71.2% owner-occupied and 69.8% single-family detached — a high ownership and detached share, which is favorable for rooftop solar. About 66.3% of units were built before 1980, which is why roof condition leads this page. A climate station is not reported for this metro in the site dataset, so no temperature or snowfall normals appear here.

    Detroit housing indicators

    U.S. Census Bureau ACS 2024 5-year estimates, CBSA tables.
    IndicatorValueSource
    Owner-occupied share71.2%U.S. Census Bureau
    Single-family detached share69.8%U.S. Census Bureau
    Housing units built before 198066.3%U.S. Census Bureau
    Housing units1,926,157U.S. Census Bureau
    Metro households1,768,816U.S. Census Bureau
    Metro population4,376,828U.S. Census Bureau

    No climate normals are shown because no station record is held for this metro in the site dataset. Irradiance, snow cover and shade must be modelled for the specific roof.

    Frequently Asked Questions

    Is solar worth it in Michigan?

    It can be, because a northern array still offsets a meaningful share of annual consumption and summer cooling load is real. Whether it works for a specific house depends on roof age, shade and the current credit structure rather than on latitude alone.

    Does snow make winter production zero?

    Effectively zero while the glass is covered, which is why the production profile is seasonal. Snow usually clears between storms rather than sitting for months, and a steeper pitch sheds more readily. Never plan on climbing a snowy roof to clear panels.

    My roof has two layers of shingles. Can I still install?

    Physically yes, but it is a poor investment if the roof is near replacement, because the array has to come off and go back on. Establish the remaining life in writing first, and compare the cost of roofing now against reinstallation later.

    How much does shade matter here?

    It can decide the project. Tree cover varies enormously between blocks, so a seasonal shade study on the actual roof is the only reliable basis. Per-panel electronics help limit the effect of a shaded section.

    What if the utility credits exports below retail?

    Then the value shifts toward the electricity the household uses while the array is producing, and sizing should reflect that. Ask for production and consumption compared month by month rather than one annual total.

    How will I know the system is performing?

    Monitoring at the inverter or per panel, compared against the modelled estimate month by month. Ask what is monitored, how underperformance is detected, and who investigates it.

    Sources and review date

    Reviewed on 2026-11-18.