A young stock does not mean a modern service — and a pool plus a generator inlet can exhaust one quickly.
Only 23.8% of the housing here predates 1980, so most of the electrical work is in houses from the boom decades rather than in pre-war properties. That shifts the problems: fewer knob-and-tube situations, more 150-amp and 100-amp panels from the 1980s and 1990s that are now being asked to carry central cooling, a pool pump, an EV charger and a generator inlet. Because 58.5% of the stock is single-family detached and pools are common, the outdoor electrical work here is a bigger share of the total than in most metros.
A panel that was specified for a house with a range and a dryer does not necessarily have room for the additions a household makes over thirty years, and the answer is a load calculation rather than an assumption. Replacing a panel on an undersized service is the classic false economy, and it is worth deciding early whether the project is a panel swap or a service upgrade, because the utility coordination and the permit differ. Ask for the calculated load, whether the service entrance equipment is included, and how grounding is being brought up to current requirements.
Pool equipment is an electrical installation as much as a plumbing one: the metal parts have to be bonded together so that a fault cannot create a difference in potential, and the circuits serving the equipment need the protection appropriate to a wet location. Outdoor receptacles and lighting around a lanai or a dock raise the same questions. Ask whether the existing pool is bonded, what protection the outdoor circuits have, and whether the work requires a separate permit and inspection.
A hurricane season that takes the power out for days makes backup power a practical request, and the safe method is a transfer switch or an interlock kit that prevents backfeeding the utility lines. The circuits that can run on a portable generator are a small, deliberate subset, and the installation has to account for where the inlet sits, how the cord reaches it and how the exhaust is kept out of the house. Ask what the connection method is, which circuits are being transferred, and whether the work is permitted and inspected.
Houses of the late 1960s and 1970s may have aluminum branch circuits that need proper remediation at the connections, and panels in a garage — the usual location here — sit in a hot, humid space that ages everything faster. Damp and heat also make the condition of the panel enclosure and the torque on the terminations worth checking. Ask what the inspection found at the panel and the devices, whether any aluminum connections will be remediated, and whether the panel location has any moisture problem.
When the answer is a service upgrade rather than a panel swap, the project stops being entirely a contractor's job: the utility has to disconnect, the new service and meter socket go in, the inspection has to pass, and the utility reconnects. That sequence drives the schedule and the cost of being without power. Ask who books the disconnect, how long the house will be without power, and whether any of that is included in the price.
- What panel and service rating is installed, and is the load calculated in writing? - Is the scope a panel swap or a service upgrade, and who books the utility? - Is the pool bonded, and what protection do the outdoor circuits have? - For backup power, is a transfer switch or interlock specified and permitted? - Are aluminum branch circuits present, and how will connections be remediated? - Is the panel location dry and properly enclosed?
No prices are quoted and no property is assessed here. Panel condition, bonding and service capacity have to be judged on site by a licensed electrician, and code questions belong to the authority having jurisdiction.
The 2024 ACS 5-year estimates describe about 2.79 million residents in 1,022,315 households and 1,145,360 housing units, with 63.1% owner-occupied and 58.5% single-family detached. Only 23.8% of units predate 1980 — the youngest stock in this dataset — so most panels here are of the boom decades rather than pre-war. No climate station is reported for this metro in the site dataset, so no temperature or precipitation normals appear on this page.
| Indicator | Value | Source |
|---|---|---|
| Housing units built before 1980 | 23.8% | U.S. Census Bureau |
| Single-family detached share | 58.5% | U.S. Census Bureau |
| Owner-occupied share | 63.1% | U.S. Census Bureau |
| Metro households | 1,022,315 | U.S. Census Bureau |
| Housing units | 1,145,360 | U.S. Census Bureau |
| Metro population | 2,793,746 | U.S. Census Bureau |
No climate normals are shown because no station record is held for this metro in the site dataset. The young stock moves the work toward capacity upgrades and outdoor circuits rather than toward replacing knob-and-tube.
Reviewed on 2026-11-18.