Philadelphia roofing is decided by the roof you actually have: flat, low-slope, slate, or a mix over a hundred years of additions.
In a metro where about 66.6% of housing units were built before 1980, according to ACS estimates, roofs are rarely one system. A rowhouse may have a flat roof at the rear, a pitched section at the front, and a parapet wall shared with a neighbor. The scope that matters is the one written for that specific assembly, not a general roof replacement package.
Ask what roof type and covering the proposal addresses: built-up or modified bitumen on a flat, asphalt shingle on a slope, slate or tile on an older pitched roof. Each has different repair methods, different expected service life, and different skill requirements. A contractor who mostly installs shingles may not be the right one for a low-slope roof.
In attached housing, the most common leak points are junctions: where the roof meets a shared wall, where a parapet cap has failed, and where a chimney passes through. Ask how these details are addressed, whether counter-flashing is replaced or reused, and how the work is coordinated with a neighbor if the wall is shared.
Ask whether the quote includes a full tear-off or an overlay, how many existing layers are present, and what happens if the decking is found to be soft or deteriorated. The condition of the sheathing is unknown until the old roof comes off, so ask how that discovery is priced and approved.
Ask how the roof assembly ventilates and how attic or ceiling moisture is handled. In older homes with bathroom fans discharging into an attic, the roof deck can be wet from the inside — a problem that a new roof does not fix. Ask whether ventilation is in scope.
- Which roof areas and coverings does this scope address? - Are party walls, parapets, and counter-flashing included? - Is this a tear-off or an overlay, and how many layers exist? - How will unexpected decking damage be priced and approved? - Is ventilation part of the scope? - What do the workmanship and manufacturer warranties cover?
This page does not inspect a roof or estimate cost for a specific property. Roof condition, permit requirements, and historic-district rules vary by address and jurisdiction, and should be confirmed on site and with the responsible local authority.
The 2024 ACS 5-year estimates put the metro at about 6.3 million residents and 2.5 million households. About 66.8% of occupied homes are owner-occupied, and about 43.4% of housing units are single-family detached, so a majority of households live in attached homes where roof work touches shared walls. About 66.6% of housing units were built before 1980.
| Indicator | Value | Source |
|---|---|---|
| Metro population | 6,272,014 | U.S. Census Bureau |
| Households | 2,467,761 | U.S. Census Bureau |
| Owner-occupied share | 66.8% | U.S. Census Bureau |
| Single-family detached share | 43.4% | U.S. Census Bureau |
| Housing units built before 1980 | 66.6% | U.S. Census Bureau |
Census values describe the metro area, not an individual property. A climate station is not reported for this metro in the site dataset.
Mapped in OpenStreetMap
OpenStreetMap contributors have mapped 33 roofing entries inside the Philadelphia-Camden-Wilmington, PA-NJ-DE-MD CBSA; 33 have a name. This is a map-coverage indicator, not a count of all licensed roofing businesses in the metro.
OSM coverage varies by area: a low count can mean low mapping activity, not a small market. OpenStreetMap does not record contractor licenses. To check a license, use the Pennsylvania HIC registration search. Search the Attorney General's Home Improvement Contractor registration.
Query: craft=roofer. Snapshot: 2026-11-17. Data:
© OpenStreetMap contributors,
ODbL 1.0. CBSA boundary:
U.S. Census Bureau, 2023.
Reviewed on 2026-11-18.