Here the paint is not protecting a wall from sun — it is the wall's only defense against staying wet.
A great deal of this metro's older housing is wood: clapboard, shingle and original trim on bungalows and four-squares, with 45.5% of the stock predating 1980. In a climate with 36.9 inches of rain and a July mean of 70.2°F, the wood is wet for months at a time, and the coating is what stands between it and rot. That changes the priorities. The enemy is not ultraviolet degradation but persistent moisture, mildew on shaded faces, and the joints where water sits — and the practical constraint is that the reliable dry window is short, roughly from June to September.
When siding stays damp, the failure starts at the bottom of the wall and at the joints: paint blisters, the wood behind it softens, and the repair becomes carpentry rather than coating. The usual contributors are a gutter that overflows, a downspout discharging at the foundation, shrubs holding damp against the wall, and soil piled above the siding. Ask how the contractor handles the bottom courses, whether any water source will be corrected before painting, and whether soft wood is being replaced rather than sealed.
North-facing walls and surfaces under trees grow mildew and algae here, and it is a maintenance cycle rather than a one-time problem. Coating over growth without treating it seals it under the film and it returns through the surface. Products formulated for the exposure help, but the cleaning step is what matters. Ask how the growth will be treated, whether the wall is being kept wet by irrigation or a downspout, and what product is specified for the shaded elevations.
Coating needs the surface dry and the conditions within the product's range through curing, and in this climate that concentrates the work into a few months when every contractor is busy. The shoulder weeks are where failures are made: a warm September afternoon can be followed by rain before the film has formed. Ask how the schedule is built around the weather, what happens if a job runs into October, and whether the scope is sized realiztically for the season.
On a house of this age, exterior preparation is most of the labor: scraping, sanding to feather edges, spot priming bare wood, re-caulking joints and treating any growth. It is also the activity that generates dust and chips, which is why houses built before the lead restrictions need lead-safe practices. Ask for the preparation steps in writing, whether the firm is certified for lead-safe renovation, and how debris and wash water are contained on a tight urban lot.
The places that fail first on a house here are the ones where water sits and the wood is end-grain: window sills, the bottom of door slabs, the ends of clapboard at a corner, and the fascia behind a gutter. These are also the fiddly parts that get skipped when a job is priced tightly. Ask how the trim is prepared, whether any of it is being replaced, and whether doors and windows are being coated on their edges rather than only on the face.
- What preparation is included — scraping, feathering, spot priming, caulking? - Will water sources at the base of the wall be corrected before painting? - How is mildew and algae treated, and what product is used on shaded faces? - Is soft or rotted wood being replaced, and is that in the price? - How does the schedule handle the short dry window and an early autumn rain? - Is the firm lead-safe certified for a pre-1978 house?
No prices are quoted and no building is assessed here. Rot, water intrusion and lead requirements need inspection and, where relevant, a certified firm or the local authority.
The 2024 ACS 5-year estimates describe about 2.52 million residents in 1,010,265 households and 1,062,495 housing units, with 61.7% owner-occupied and 60.2% single-family detached. About 45.5% of units predate 1980, so wood siding and original trim are still widespread. At the reference station annual precipitation is 36.9 inches, with 5.03 inches in January and 0.51 inches in July.
| Indicator | Value | Source |
|---|---|---|
| January mean temperature | 41.9°F | NOAA NCEI |
| July mean temperature | 70.2°F | NOAA NCEI |
| Annual precipitation | 36.9 in. | NOAA NCEI |
| Metro population | 2,520,987 | U.S. Census Bureau |
| Owner-occupied share | 61.7% | U.S. Census Bureau |
| Housing units built before 1980 | 45.5% | U.S. Census Bureau |
Station normals are historical averages for one location, not a forecast. The gap between January and July rainfall is what defines the working season here, and it is narrow.
Reviewed on 2026-11-18.